|
Silage Covers
AT Plastics Inc. carries high quality UV stabilized film
for silage pits or bunkers, haystacks or utility covers.
All AT Plastics Inc. silage covers are tri-extruded with two
layers of white film on the outside to reflect heat and one
layer of black film on the inside to provide up to 100%
opacity.
AT Plastics Inc. Silage Covers are manufactured using the
same new technologically superior resin formulation that is
also found in the new AT Plastics® AST™ Silage Bag.
When comparing our new film to previous generations:
 | it will take more force to puncture or break the film |
| it will take more force to propagate a tear if the film is
accidentally damaged |
|
|
AT Plastics Inc. Silage Covers are a free-fall folded one piece cover that do not
require any sealing or taping. The sheeting is offered in a Black/White tri-extruded film
and an all Black tri-extruded film. All AT Plastics Inc. Silage Covers offers a one year
warranty against manufacturer's defects.
The Black/White tri-extruded film offers the
following advantages:
|
the white exterior reflects heat and light |
|
high opacity |
|
12 month ultra violet (UV) stabilization |
The all Black tri-extruded provides the producer
with a lower initial cost alternative as compared to the Black/White sheeting.
Stock Sizes
| Product
Code |
Width
X Length (feet) |
Rolls
per Pallet |
|
Black/White 5.0 mil gauge |
| 4446534 |
40 X 100 |
20 |
| 4450158 |
50 X 100 |
12 |
| 4450159 |
50 X 150 |
9 |
| 4454235 |
50 X 200 |
4 |
| 4453942 |
60 X 150 |
8 |
| 4457577 |
60 X 200 |
4 |
|
Black/White - 6.0 mil gauge |
| 4440836 |
32 X 100 |
16 |
| 4440835 |
40 X 100 |
16 |
| 4450243 |
50 X 100 |
12 |
| Black/White
- 8.0 mil gauge |
| 4440840 |
40 X 100 |
12 |
Black/White - 5.0 mil gauge (QUIK-SEAL) |
| 4866319 |
40 X 100
|
20
|
| 4865903 |
50 X 100
|
12
|
| 4865904 |
50 X 150
|
9
|
| 4866320 |
50 X 200
|
4
|
| 4866321 |
60 X 150
|
9
|
| 4866322 |
60 X 200
|
4
|
Black/White - 6.0 mil gauge (QUIK-SEAL) |
| 4865902 |
32 X 100
|
16
|
| 4865901 |
40 X 100
|
16
|
| 4866324 |
50 X 100
|
9
|
| Black
- 6.0 mil gauge |
| 4228446 |
24 X 100 |
30 |
| 4228413 |
32 X 100 |
16 |
| 4220535 |
40 X 100 |
16 |
| 4221572 |
50 X 100 |
12 |
| Black
- 8.0 mil gauge |
| 4220536 |
32 X 100 |
12 |
| 4220544 |
40 X 100 |
12 |
Note: All non-stock Silage Covers require a 5,000 lbs minimum order.
All Silage Covers can be manufactured to any width, length or gauge combination
providing minimum order requirements are met. Call Customer Service at
1-800-661-3606 for details.
Revised: September 30, 2005
Return to AT Plastics® Home Page
|
